Carrier Access/CAC ABI w/24 E&M Channels & Cables(930-0003)

Management:

• Optional remote Windows-based GUI management with built-in modem

•  Front panel T1 test switches and status LEDs

•  Back panel analog channel option, test switches, and status LEDs

•  Built-in T1 self-test and telephone line ringing and tone tests

Digital T1 Interface:

•  Terminates 1.536 Mbps (24 channels) of usable bandwidth

•  Integrated intelligent CSU: DS1 or DSX-1 signal levels from 0 to ?30 dB

•  D4 (SF), ESF framing, and SLC-96 framing with TR-08 option

•  AMI or B8ZS line coding

•  Clock source: Enhanced Stratum 4 (master) or synchronized to T1 line Telcordia? TR-08 shelf, A, B, C, or D function (optional)

Analog Interfaces:

•  FXS 12-channel card: Supports CLASS features; provides loop-start, ground-start, E&M signaling conversion and calling party disconnect

•  BRFXS/DPO 12-channel card: Supports CLASS features; operates as a Battery Reversal FXS loop-start card (BRFXS) or a Dial Pulse Origination (DPO) card
• FXO/DPT 12-channel card: Supports CLASS features; operates in FXO loop or ground-start signaling or Dial Pulse Terminate (DPT) signaling; E&M signaling conversion and calling party disconnect

•  4 FXO + 8 FXS modular voice card: Supports 4 FXO/DPT circuits and 8 FXS circuits as described above

•  4-Wire E&M /TO 12-channel card: Supports signaling types I, II, IV or V; uses up to 4 signaling and transmission pairs per channel (E/M, SG/SB, T/R and TI/RI)

•  2-Wire E&M/TO 12-channel card: Supports signaling types I, II, IV or V; uses up to 3 signaling and transmission pairs per channel (E/M, SG/SB and T/R)

•  Patented automatic two-wire analog impedance adjustment adapts to various modems and line lengths

•  Full compatibility with V.34 (33.6 Kbps) and V.90 (56 Kbps) modems

Alarms:

•  Optional alarm dial-out notification over integrated modem (remote management option)

•  External alarm contact for visible or audible alarms

Power:

•  48 VDC 1A input from battery source

•  Optional 115 VAC/75 W power converter

•  Optional 220 VAC/50 Hz to ?48 VDC converter module for international applications

•  Solid-state fuse less over voltage and over current protection

Physical:

•  Dimensions:

        – 1.75 in. (H) x 17 in. (W) x 17.75 in. (D)

        – 4.45 cm (H) x 43.18 cm (W) x 45.09 cm (D)

•  Weight: 14.5 lb. (6.6 kg) fully loaded

•  Rackmount: 19 in. (48.26 cm) or 23 in. (58.42 cm)

•  Twenty-four Access Bank Is can be mounted in a standard 7 ft. (2.13 m), 23 in. (58.42 cm) equipment rack

•  Optional Trimount bracket to wall mount 3 Access Banks and power converters

Environment:

•  Normal operating temperature: 32° to 122°F (0° to 50°C)

•  Solid-state over-temperature protection
•  Relative humidity (non-condensing) range: 0% to 95%